TECNO 1ST/AR eng

tecno1star

 

TECNO 1 ST/AR 600x30 Kg
machine with 4 axis (X-Y-X-K) + automatized blade-guide


LENGTH - HEIGHT - WIDTH
 
cm
 
290 - 300 - 230

NOMINAL WEIGHT MACHINE
 
Kg
 
2200

MAX SIZE OF PIECE
 
mm
 
600 x 430 h

MAX WEIGHT OF PIECE
 
Kg
 
30

PIECE ROTATION DEGREE
 
 
 
360

SAW MOTOR
 
Kw - Hp
 
4 - 5.5
7.5-10

 
 

 

 

The TECNO

are completely automatic CUT-OFF machines with ONE or TWO INDEPENDENT CUTTING STATIONS for the cutting of casting runners, risers and ashes, capable of cutting on a linear axis and round radius.

The machine is composed from a strong supporting structure within which some robotic units run managed by a CN and it’s protected by means of anti-breaking safety panels locked and controlled by a series of safety instruments. The electronic, computerised man- agement system is complete with CN type numerical control soft- ware, programming aids, close examination internal video and multi job programme archive. The electronic control panel and computer contains the entire instrumentation as well as the colour led screen and colour video monitor.

The led displays all of the data parameters for the job running. The system records any faults or alarms that occur. The machine is pro- vided with the AUTO-LEARNING system that allows a very speed and ease programming.

A hand portable programming hand set is provided with two or three joy sticks and two memory buttons. This unit together with the video camera that zoom and ne focus the cutting point are indispensable for programming and the setting up with the techni- cian outside the cutting zone.

The computer archive can remember a high number of job pro- grams and it’s possible to save them on USB key. This innovative system of data storage allows to change some points or to make modi cations to the program without to re-make the program from the beginning. The machine is equipped with a chippings and scrap recovery system and a removable container

MAIN ADVANTAGES OF THE BIANCHI'S TECNO CUT-OFF MACHINES

- INCREASE OF PRODUCTION: The TECNO 2 is provided with two independent cutting stations therefore, in the same time, a single operator can cut two di erent pieces or two pieces of the same article; using the TECNO 1, during the automatic cutting cycle, the worker can makes other operations as for example: drilling, quality control, cleaning...

- ABSOLUTE SAFETY: The operator must put the pieces on the clamp and to remove them after cut, always outside the danger cutting zon

-  CONSTANT AND CONTINUOUS PRODUCTION: The ma- chine cuts all the pieces with the same time avoiding loss of production due to fatigue of the operator

-  ABSOLUTE PRECISION OF CUT: The machine cuts all the pieces in the same way; the cutting tolerance is one-tenth of a mm

-  LONGER LIFE OF THE BLADES THEREFORE COST SAV- INGS: The blades life is more longer because the force and pressure and the thrust of the piece on the blade are accurate and always the sam

- REDUCTION OF FATIGUE AND PSYCHOPHYSICAL STRESS OF THE OPERATOR

- REDUCTION OF COST FOR WORKER: The machine doesn’t require skilled workman

- EASE AND SPEED PROGRAMMING: The “AUTO LEARNING” system to program the machine allows to program the machine very easily and fast without skilled workman

- VERY LOW COST FOR THE CLAMPSVERY SHORT TIME TO CHANGE CLAMPS, PROGRAM AND BLADES: For these rea- sons the machine is suitable also for very small series of pro- duction (30/40 pieces)

- LINEAR, SHAPED, RADIUS AND INTERPOLATED CUTS:The machine is able to make linear and shaped cuts